20 years of focus on air compressor manufacturers.
Search News Category News Tags
Latest News Archive Time
How does the screw air compressor work?
How does the screw air compressor work?

1. Inhalation procedure:
The suction port at the consumption aspect of the screw kind ought to be designed in order that the compression chamber can absolutely inhale, even as the screw compressor does now no longer have an consumption and exhaust valve group. The consumption most effective relies upon on the hole and last of a regulating valve. When the rotor rotates, the teeth groove area of the primary and auxiliary rotors has the biggest area whilst it's miles grew to become to the hole of the inlet give up wall. At this time, the teeth groove area of the rotor is in conversation with the loose air of the inlet, due to the fact the air withinside the teeth groove is exhausted. It is absolutely exhausted. When the exhaust is finished, the teeth groove is in a vacuum state. When it's miles grew to become to the air inlet, the out of doors air is sucked in and flows into the teeth groove of the primary and auxiliary rotors alongside the axial direction. When the air fills the whole teeth groove, the air inlet aspect give up floor of the rotor turns farfar from the air inlet of the casing, and the air among the teeth grooves is closed.

 

2. The procedure of sealing and conveying:
When the air consumption of the primary and auxiliary rotors ends, the peaks of the primary and auxiliary rotors are sealed with the casing. At this time, the air is closed withinside the grooves and not flows out, that is, [closed process]. The rotors retain to rotate, and their teeth peaks and grooves coincide on the suction give up, and the anastomotic floor regularly actions to the exhaust give up.

 

3. Compression and gasoline injection procedure:
During the conveying procedure, the meshing floor regularly actions to the exhaust give up, that is, the teeth groove among the meshing floor and the exhaust port regularly decreases, the fueloline withinside the teeth groove is regularly compressed, and the strain increases, that is the [compression process]. At the identical time of compression, the lubricating oil is sprayed into the compression chamber and combined with the chamber air because of the impact of the strain difference.

 

4. Exhaust procedure:
When the meshing give up floor of the rotor turns to speak with the exhaust of the casing, (the strain of the compressed fueloline is the very best at this time) the compressed fueloline starts offevolved to be discharged till the meshing floor of the teeth crest and the teeth groove actions to the exhaust give up floor. At this time, the 2 rotors The teeth groove area among the meshing floor and the exhaust port of the casing is zero, and the (exhaust procedure) is completed. At the identical time, the period of the teeth groove among the meshing floor of the rotor and the consumption port of the casing reaches the longest, and the suction procedure In development again

 

 

Leave a Reply

Your email address will not be published. Required fields are marked *

WhatsApp us

Chat with Guangzhou AirHorse Compressor Co., Ltd.
already 1 902 messages

  • Guangzhou AirHorse Compressor Co., Ltd. 17:32.PM  May.28,2022
    Hello, dear sir/madam, welcome to our website! I’m Sally,how should I address you?